Skip to Content

Burlap Table Runner for Your Holiday Cookie Exchange

Learn how to make a burlap table runner using ribbon from the craft store – no sewing required! Perfect for the holidays and parties.

Skills Required: None. Even if you’ve never crafted before, you’ll be able to accomplish this project. You’ll be weaving and hot gluing.

Burlap Table Runner for Your Holiday Cookie Exchange

Are you obsessed with plaid this season? I am! I recently did a post on Mod Podge Rocks where I shared my buffalo plaid themed cookie exchange, where I used handmade items and goodies purchased from Shutterfly; and I also shared my tutorial for photo transfer medium favor bags.

In this post I’m going to share the DIY burlap table runner I created, that you can do with nearly ANY ribbon and hot glue! Here’s a little more about my cookie exchange.

Use personalized Shutterfly printed items along with my DIY burlap runner tutorial to have the best plaid themed cookie exchange ever!

Party invitations are one of the most important things to develop first impressions of your shindig. It was really hard to pick invitations from Shutterfly – but hard is is when you like to have a lot of choices (and I do).

They have so many beautiful options, AND you can add images and even select the edge treatment of your cards. You’ll definitely find something you like!

To customize my party with the buffalo plaid theme, it required purchasing a few items to create “ambiance.” So what I did is designed this graphic that I’m making available to you for download as well.

Merry & Bright Canvas

Download the full graphic HERE. Download the graphic that says “Merry & Bright” only HERE.

You’ll be able to upload this graphic to the Shutterfly or any other personalization website and use it to create items for your party just as I did.

I started with a canvas.

Use personalized Shutterfly printed items along with my DIY burlap runner tutorial to have the best plaid themed cookie exchange ever!

I wanted a canvas that could be used at my cookie party, but also around my home for the entire winter season. The weathered wood treatment with the plaid is just my style.

Use personalized Shutterfly printed items along with my DIY burlap runner tutorial to have the best plaid themed cookie exchange ever!

These next two items could be my favorite from the whole party!! I mean all of it excited me, but I had NO idea that Shutterfly had candles. And obviously they can be personalized, so that’s just what I did.

You can use any image you like, not just my graphic, and there are five scents to choose from There will definitely be a pug candle purchased next . . .

And maybe some pug stickers. I had this (brilliant?) idea to purchase 1.75 x 1.75″ stickers and add them to some 2″ wood blocks I already had on hand. Quick and easy decorating with not a lot of effort – I love it!

I got a little creative with the blocks, but there are two handmade items in my cookie party that I have to share. I made the mini favor bags using photo transfer medium (tutorial Mod Podge Rocks) and then I made a DIY burlap table runner that you can see here:

Use personalized Shutterfly printed items along with my DIY burlap runner tutorial to have the best plaid themed cookie exchange ever!

I’ve always wanted to make my own table runner from ribbon, but I had a challenge that none of the tutorials online tell you.

If you use hot glue and/or craft glue on most ribbon, unless it’s pretty thick, you’re going to be able to see the glue seep through (it will show up as a dark spot).

I figured out a way to make my table runner so that you can use just about ANY ribbon and, because of the double layers and the way it’s constructed, the glue doesn’t seep through!

DIY Burlap Runner

Read on to learn how I made it. You’re going to gather these supplies:

IMG_1723

You’ll need to read carefully to follow what I’m saying, not because it’s hard but because it’s a little hard to explain!

First you’ll need to determine the dimensions of your runner and cut all of the pieces to make it. For our finished runner size of 13.5″ x 60″, we cut:

  • 9 pieces of ribbon 64″ long – they need to be 2″ + 2″ longer than you want your runner to be long
  • 40 pieces of ribbon 17.5″ long – they need to be 2″ + 2″ longer than you want your runner to be wide

Because the ribbon is 1.5″ wide, the width of the runner is going to have to be some multiplier of 1.5″ . . . so 12″, 13.5″, 15″, or something like that.

We used wire ribbon, which helps when you are bending over the edges to glue, which you’ll have to do. But technically . . . you could use any type of ribbon as long as it’s not the really thin organza kind. You can’t help but see the glue through thin ribbon!

IMG_1728

A wood or tile floor is going to be your best friend for this project. You need a surface to lay everything out so that you can see it, and you have a place to weave. You’ll be taping painter’s tape on this surface, so don’t worry, because painter’s tape comes up and doesn’t do damage.

Cut your 40 strips like I did above, each one of them 17.5″ in length, and lay them next to each other like you see in the image – and tape them down. You’re going to weave through these shorter pieces with the longer strips.

step 2

Now cut your longer pieces . . . and lay the first long piece 2″ down from the top of your other pieces, as shown. You aren’t going to weave this piece.

IMG_1732

You’re going to weave the second piece but you will SKIP the first piece when you do it, as shown.

IMG_1733

Keep adding and weaving your longer pieces until you get to the last one . . . you won’t weave that one either. So the outer pieces will not be woven while the inner seven pieces will be. Make sense?

I know we skipped some weaves . . . but THAT is how you have a double layer and don’t see the glue. Each layer that is glued has two layers above it. Strange, but it works! You’ll see how the burlap table runner comes together – keep reading.

hot glue areas

Now that you are finished weaving, you’re going to hot glue down the longest edge of the runner first. Each ribbon will be glued in the location shown above . . . down one side and up the other.

Glue and fold over.

IMG_1737

Now you’re going to tackle the ends. We trimmed them a bit just to keep them neat, if you like.

IMG_1738

Add hot glue . . .

IMG_1739

And fold.

IMG_1740

Continue on gluing and folding, then repeat on the other end.

Let cool and flip over. You are done with your burlap table runner!!

Use personalized Shutterfly printed items along with my DIY burlap runner tutorial to have the best plaid themed cookie exchange ever!

I’m THRILLED with this burlap table runner, because I can use it all year ’round. In fact, I’m thrilled about everything at my cookie exchange party including the invitations, decor, and favors.

Use personalized Shutterfly printed items along with my DIY burlap runner tutorial to have the best plaid themed cookie exchange ever!
Yield: 1 runner

Burlap Table Runner

Burlap Table Runner

Learn how to make a DIY burlap runner using ribbon from the craft store! Such a pretty way to decorate a holiday table.

Prep Time 15 minutes
Active Time 1 hour 30 minutes
Total Time 1 hour 45 minutes
Difficulty Easy
Estimated Cost $6

Materials

  • Faux Burlap Wired Ribbon, 1.5" - 2 rolls
  • Painter's tape

Tools

  • Scissors
  • Hot glue gun and glue sticks
  • Silicone mat

Instructions

  1. Determine the dimensions of the runner and cut the ribbon pieces for weaving. We cut 9 pieces of ribbon 64" long and 40 pieces of ribbon 17.5" long.
  2. Lay the 40" strips next to each other and tape them down with painter's tape. You'll weave through these pieces with the longer strips.
  3. Lay the first long piece 2" down from the top of your other pieces. You aren't going to weave this piece.
  4. You're going to weave the second piece but you will SKIP the first piece when you do it.
  5. Keep adding and weaving the longer pieces until you get to the last one . . . you won't weave that one either.
  6. When finished weaving, hot glue down the longest edge of the runner first. Hot glue in two locations and fold over. Repeat on the other long side.
  7. On the short side, trim the ends just a bit with scissors to keep them neat.
  8. Add hot glue and fold the ends over on the short sides of the runner as well.
  9. Let cool and display.

Notes

Prices for this project can vary greatly depending on the type of ribbon you buy.

Did you make this project?

Please leave a rating or share a photo on Pinterest!


What are your “must haves” for a cookie exchange party? Let me know in the comments! I’d also love for you to check out these

This DIY washi tape tree is a no-fuss way to display the holiday cards that arrive in your mailbox each day! It comes right off the wall when you're done.
Previous
Christmas Card Tree Made with Washi Tape
Baked apple cider donuts recipe
Next
These Baked Apple Cider Donuts Are Easy & Delicious

Paige

Monday 21st of December 2015

This runner is such a great idea! I love that you weaved it all together! It gives it a fun and unexpected texture!

Paige http://www.thehappyflammily.com/

mami2jcn

Monday 21st of December 2015

I will purchase a photo puzzle. My kids love those!