Happy National Donut Day! I would be lying if I said that I didn’t want to celebrate donuts every day. I mean, who doesn’t like donuts? They are definitely on my pregnancy list of cravings. Which is growing just like this tummy. So what better way to sprint happily today while I’m with child than to sport a t-shirt with yummy frosting and tasty sprinkles? Here’s how you can create one for you or a special preggo you know.
- Plain tee
- Cardboard piece
- Large plate
- Lid to a jar
- Paper with phrase/lettering or stencils
- Multipurpose acrylic paint (mine listed fabric on the back)
Iron your shirt and lay it flat. Place the piece of cardboard inside the shirt. Use your pencil to mark where you would like the wording and where the donut will go. I tried on the shirt after just to make sure the placement was right.
To make the donut shape, flip a large plate and trace it onto the shirt. For the donut hole, do the same but with a lid from a jar. I used an old lid from a Parmesan jar. Freehand the frosting by drawing curved lines about .5 inch or less from the edge of the plate.
Now the fun part! Paint away! I started by using a fine brush for the wording. For the donut, a square brush works best. Use it to make the edges nice and crisp. Take your time and combine brush strokes with dabs.
For the frosting I used the square brush. Since this would be the largest area, allow the paint to dry after the first coat and then go back and dab any white cotton that might be showing through. Choose three paint colors for your sprinkles and use the fine brush to create smooth 2 inch lines on the frosting. Be random, it’s a donut! You can’t go wrong with sprinkles! Allow the paint to dry for about an hour before wearing. To make the shirt washable, check the back of your paint tubes. Mine said to cure for 21 days. After I will lay a scrap piece of fabric down and for 30 minutes press with a cool iron. Then throw it in the dryer to finish setting on low heat for about 30 minutes.