Tips & tricks

DIY Hose Holder with Pallet Wood Planter

Build a unique DIY hose holder planter using pallet wood! The hose stores in the bottom and flowers can be planted right on top.

DIY Headbands

Gather These Supplies - Pallets - 2 x 2s – 16 feet,  - Thompson’s water seal Tools - Miter saw - Planer CUT LIST -Pallet Wood 

Tips and Tricks for Successful DIY Tie Dye

Gather your pallet wood. Using a planer, plane your pallet wood planks to a uniform thickness; approximately 1/2".

Step 1

Use a miter saw to cut your planed pallet planks to 17” lengths. Lay them out - they will be varying widths, which is fine.

1. Braided DIY Headband

Make cross pieces for the top and bottom. Use a miter saw to cut some of the remaining pallet wood into the top and bottom panel trim pieces.

2. Knotted DIY Tie Headbands

Assemble all four frames with the wood pieces.

3. Twisted DIY Headband

Use a nail gun to reinforce the panels you just glued. Use 3/4" nails.

Swipe Up for MOre