Tips & tricks
Use your circular saw to make all of the cuts on the cut list. For the pieces on the pumpkin, there is flexibility to cut slightly shorter to accommodate all of the pieces per given materials list. For the box pieces, you need to cut very straight and accurately.
You will then lay the four fence pickets on the work surface – the overall width should about 23″. Place the 20″ long 1x2s on top with approximately a 1-1/2″ gap on either end. Use wood glue and your staple gun to secure 1x2s to the fence pickets.
Flip the project over and use the carpenter’s pencil to draw a pumpkin shape on the front of the boards.
Now we wanted our pumpkin stem to look “organic” just like our pumpkin. So at this time we clamped a small piece of wood down as well and turned it into a stem. Place stem in center of pumpkin and attach with glue and 2″ staples.