DIY Christmas Gnomes
Learn how to make gnome Christmas decor in a few easy step! This is perfect for your holiday decorating.
Servings 2 gnomes
Cost $15
Equipment
- Sharpie or pen
- Sandpaper
Ingredients
- 2 Paper mache cones
- Cone template
- Beard template
- 2 Wood beads
- Acrylic paint skin tone of your choice
- Flannel fabric enough to cover the cone
- Faux fur pieces
- Paper to print template
- Spray adhesive
- Painter's tape
Instructions
- Print out the template and assemble using tape. Cut out.
- Cut 1 3/4" off of the bottom of the template. Test fit and then set aside for the moment.
- Paint the bottom of the cone with a few coats of acrylic paint, using the skin tone of your choice. Let dry.
- Cut the fabric of the hat out using the template.
- Tape off the bottom of the cone using painter's tape so you don't get adhesive on the skin area.
- Apply spray adhesive to the top portion. Wrap the fabric around, smooth, and let dry.
- Cut the faux fur for beards using the template. Trace on the back and then keep the faux fur forward while cutting.
- Attach a beard piece to the base of the cone using a hot glue gun.
- Sand a flat spot on a wood bead using sandpaper. Hot glue the nose in the center where the beard meets the fabric to finish.
Video
Notes
My cone printout was printed on poster setting, full size – it should take four pieces of paper.
Tip: The large scrap piece that you cut off the bottom at the widest part of the curve? You’re going to use it to draw a line about 1 3/4″ from the bottom of your template! Turns out the cut scrap makes a perfect curved line for you to trace.
