DIY Door Hanger
Learn how to make a wood door knob hanger with a chalkboard writing surface on the front!
Servings 1 door hanger
Cost $1
Equipment
- Pencil(s)
- Sandpaper (optional)
Ingredients
- Unfinished wood plank
- Acrylic paint
- Chalkboard paint clear
- Mod Podge any formula (Hard Coat is great)
- Scrapbook paper
- Rope or string
- Wood beads
- Painter’s tape
Instructions
- Sand the wood plank to remove rough areas and edges. Wipe away the sanding dust.
- Apply craft paint to the wood plank (both sides). Also paint the wood beads. Use enough coats to fully cover and let dry.
- Apply the clear chalkboard paint over the top of the paint, using 2 - 3 coats (follow bottle instructions). Let dry.
- Measure and cut scrapbook paper to fit the top of the hanger. Apply Mod Podge to the hanger, smooth down the paper and let dry. Apply a top coat of Mod Podge and let dry.
- Drill two holes into the top of your planks (you can use painter's tape to avoid splintering).
- String the twine through both holes and tie at the top, stringing on a bead between knots. Hang.
