Use woodgrain Duck Tape to make this easy iPad case. It’s no sew, lined, and assembles in about 15 minutes. Perfect for school or office!
Okay, so this is one of our favorite projects we’ve ever done here on DIY Candy; probably because it’s so easy and very useful. You see, I gifted my iPad to Steve recently, and he didn’t quite like the case that I had on it. He had the gall to call it “girly.” What?!
After receiving a large shipment of some new fall patterns of Duck Tape, we decided that we’d challenge ourselves to make an iPad case . . . one that was lined, and no-sew, and could be put together easily and quickly. We were successful, and I’m so excited to show you how to do it!
DIY iPad Case
Gather These Supplies
- Fabric large enough to cover your iPad – cotton works best
- Duck Tape – we used Wood Grain and Electric Blue
- Pen (we used a dissolving fabric pen)
- Craft knife and cutting mat
- Adhesive Velcro squares
Your first step is to lay out your fabric with your iPad on top. Making the fabric the right size is not an exact science . . . it doesn’t need to be an exact size. You want to leave about 1/4 to 1/2″ on all sides plus enough room for a 1″ flap on the top.
I think the nice thing about not being exact is that you don’t have to be an engineer to complete this project . . .
But laying your iPad on top and drawing around it using a fabric pen (or any pen really) ensures that it’s going to be large enough for your iPad. We did it in ONE continuous piece. That means that the fabric comes down the back and folds over the front. You can use two separate pieces; that is fine. Just make your lines and cut carefully with your scissors.
The nice thing about having one continuous piece of fabric like we did is that you can easily just run your Duck Tape all the way down the fabric without having to piece anything together. But it’s not that hard to do this with two pieces of fabric. DO make sure your pattern is going to face the inside! You should be taping the back of the fabric.
If your Duck Tape overlaps the edge of the fabric slightly as ours did, trim with a craft knife. It also gets rid of any cruddy edges on the fabric edge.
- Two long enough to go down each side
- One to go across the bottom
- One to go across the very top flap
- One to go across the top of the case at the front
BUT you’re going to cut each strip in half, so you can double up on some of the above. Yep, you want each strip of Electric Blue to be 1/2 the size of a regular piece of Duck Tape. You can do this on your cutting board with your craft knife and then peel up.
At the very top where the flap is, make a notch with the craft knife as shown before folding over.
Make sure to cover all edges with the Electric Blue tape. SMOOTH throughly.
And then with your electronic baby all secured inside. The fabric interior will keep the screen from getting scratched. SO easy to make – even a kid can do it. Show your teenagers how to make their own iPad case for back-to-school!
To get inspired by more Duck Tape ideas for back-to-school, follow them on the following social channels:
and sign up for their newsletter HERE!
Disclosure: I received compensation from Duck Brand to bring you this back-to-school project. All opinions are 100% mine.