Batman Perler Beads (50+ Free Patterns!)

Get over 50 patterns for Batman perler beads! If you love the comic books and movies, you’ll enjoy these patterns made for kids or adults.

I grew up in a house full of brothers, so we were always excited about superheroes. I mean every kid is excited about superheroes, right? it’s one of the first things you want to be when you grow up.

It’s because the life of a superhero is something else. You’re always rich, you have a butler (and a very clean home), and you’re capable of creating awesome tools and supercars to bring your city justice.

For example, I think we all know of Batman. I liked the show with Adam West when I was young (reruns), and the movie with Michael Keaton and Jack Nicholson came out when I was 12.

And if you think about it – there’s something very special about Batman. Bruce Wayne doesn’t have any super powers. He’s just a regular guy like you and me.

Call me cheesy, but that speaks to the potential inside all of us. You don’t need superpowers to make an impression on this world! You might need to be rich but that’s another blog post 😮

Anyhoo, my family loves the Batman movies. We’ve seen them all.

My niece and I talked all about Batman, Robin, Joker, and all the characters as we put together these Batman perler beads for you to enjoy!

If you love Batman too – or any of the characters (heroes, villians, and women included too) – you’re going to love these patterns. There are over 50 of them, from easy to more advanced.

There are also patterns from every era of Batman including Adam West’s time, Batman Forever, the Dark Knight, etc. If we’re missing anything you’d like to see, we’d love to hear in the comments. We’re always making new patterns.

Perler beads are recommended for ages six and up, so this is a very fun craft to try with your elementary age kids. All children seem to love perler beads (also known as hama beads, fuse beads, or melty beads). But don’t be shy – adults love them too!

Tips for Using Perler Beads

Before re we get into the patterns, I want to review a few basics of using fuse beads to make sure you get the best results. If you don’t want the tips, scroll down to the bottom to get the Batman perler bead patterns.

Remember that the overall goal is to melt the beads together on both sides while still leaving the holes open. Here’s how you get the best results (using Baby Yoda as an example).

Star Wars perler bead pattern on a pegboard

Use Ironing or Parchment Paper

Place ironing paper or parchment paper over the beads on the pegboard. Be gentle so you don’t disturb the beads underneath.

Heat your iron to the medium setting (no steam). In a circular motion, begin to iron the project. Don’t press down too hard with the iron. When ironed properly, the beads will still have an open center. Check and make sure your edges are melted. Let the design cool on the pegboard.

Ironing the parchment paper with an iron

Note: BE CAREFUL about lifting up the paper while you’re ironing! If you want to check, carefully peel back paper around the edge of your design and see if all the beads are melted.

If you lift the paper up quickly and there are a lot of unmelted beads, they will easily fall off or go flying and you may be forced to start over. Sometimes the edges need more time so when you check, just check the edges and peel paper back slowly.

Another Note: some beads melt faster than others (clear melts faster than white, for example). So some holes might be larger than others. It’s okay! That’s part of the look of the project.

Iron the Other Side

Remove the bead design from the pegboard. Flip it over to the non-melted side and repeat the fusing process.

Ironing the other side of the melty beads with the iron

Remove the Paper

Let cool completely and remove the paper again (which is reusable). Some people pull the paper off after they iron the first side, but I just wait until the end and peel off both pieces. It’s up to you!

Let’s dive into the patterns, shall we?

Batman Hama Beads

A few of these patterns are larger than a 29 x 29 pegboard, so you’ll either need a extra large pegboard (49 x 69 tall) or to put multiple square peg boards together to form a larger “canvas.”
You’ll see a couple of the pattern backgrounds below aren’t white – that’s simply to give contrast so you can see where all the white beads should go. You don’t need to add the background (but you can if you want to).
In addition to square pegboards, you’ll see round and hexagon pegboards. These are fun to have in your arsenal if you plan to do a lot of perler-ing.
You don’t have to stick to my color choices. A lot of times I just use what I have on hand, so feel free to customize.
I typically start with easier, smaller patterns in my list and then move on to the more difficult ones. If you’re looking for something a bit more advanced, just keep scrolling!

Small Batman and Logo

The logo uses 72 yellow and 68 black beads. The batman uses 50 black, 2 white, 5 sand, 22 gray, and 1 yellow bead.

Hexagon and Round Logos

The pattern on the left is on a small hexagon pegboard – the right pattern is a large round pegboard.

Large Square Logo and Bat Wings

The pattern on the left uses 351 black and 184 yellow beads. The pattern on the right uses 60 yellow and 143 black beads.

Batman Logo with Word

This pattern uses 223 glow in the dark and 226 black beads.

Batman Pointing a Batarang

This pattern uses 113 black, 2 white, 10 sand, 67 dark gray, 4 gray, and 5 yellow beads.

Small Standing Batman

This pattern uses 181 black, 144 dark gray, 12 white, 12 peach, and 57 gray beads.

Batman with Spread Cape

This pattern uses 354 black, 2 white, 14 sand, 77 gray, and 17 yellow beads.

Masked Man

This pattern uses 285 black, 259 dark gray, 14 white, 23 sand, 94 gray, and 18 yellow beads.

Hello Kitty Batman

This pattern uses 157 black, 82 light gray, 51 white, 147 medium or dark gray, and 10 yellow beads.

Characters of Gotham

Batman uses 164 black, 123 dark gray, 8 white, 14 sand, 55 gray, 5 yellow and 2 cheddar. Robin uses 172 black, 59 sand, 76 shamrock, 6 white, 31 yellow, and 31 red beads.

Catwoman uses 177 black, 59 light gray, 17 dark gray, 20 gray, 8 white, 11 sand, 2 red, 2 tan, 4 yellow, and 1 cheddar. Joker uses 153 black, 24 shamrock, 64 white, 6 red, 17 gray, 73 purple, 7 light gray, and 16 orange beads.

I’m Batman

This pattern uses 127 black, 146 cobalt, 2 white, 25 sand, 56 pastel blue, and 10 yellow beads.

Joaquin Phoenix Joker

This pattern uses 29 neon green, 62 kiwi lime, 64 white, 26 sand, 64 red, 12 light blue, 4 light gray, 60 black, 10 dark green, and 6 yellow beads.

3D Characters with Stands

Each character has a stand. After the beads have cooled, insert the characters into the bases.

Symbols from the Batman Show

Looking for symbols from the classic show with Adam West? Here are some fun patterns!

Tsum Tsum Batman

Batman and Robin One

Batman uses 196 black, 146 cobalt, 60 gray, 8 white, 14 sand, 90 dark blue, and 15 yellow beads. Robin uses 147 black, 98 shamrock, 31 gingerbread, 61 sand, 10 white, 58 yellow, 37 red, and 8 dark gray beads.

Batman and Robin Two

Batman uses 333 cobalt, 14 white, 176 black, 23 sand, 101 gray, and 45 yellow beads. Robin uses 40 gingerbread, 35 sand, 77 shamrock, 164 black, 164 yellow, and 136 red beads.

Batman and Robin Three

Batman uses 295 black, 127 light blue, 116 cobalt, 87 pastel blue, 5 white, 13 sand, 25 pewter, 118 gray, 35 dark gray, 4 butterscotch, 4 prickly pear, 4 cheddar, and 3 yellow beads.

Robin uses 499 black, 83 sand, 146 shamrock, 8 white, 142 yellow, and 91 red beads.

Lego Heads

The Batman head uses 145 white, 162 gray, 256 black, and 50 sand beads. The Joker head uses 141 shamrock, 205 bright green, 136 white, 24 black, 32 red, 6 pastel lavender, 14 yellow, and 28 gray beads.

Classic Batman

This pattern uses 500 black, 27 dark blue, 64 cobalt, 2 gray, 11 dark gray, 10 white, 37 sand, 29 light brown, and 31 toasted marshmallow beads.

Batgirl First Appearance

This pattern uses 181 cobalt, 192 black, 219 spice, 125 orange, 16 tan, 84 sand, 2 white, 8 dark green, 6 raspberry, 2 fuchsia, and 4 fruit punch beads.

Harley Quinn

This pattern uses 159 red, 257 black, 4 hot coral, 4 dark gray, 236 white, and 16 light blue beads.

Classic Batman and Skyline

This pattern uses 226 light lavender, 206 gray, 136 dark gray, 124 black, 17 yellow, 12 white, 85 sand, and 35 light gray beads.

Classic Catwoman

This pattern uses 118 dark gray, 177 gray, 296 black, 123 peach, 5 light blue, 2 white, 3 blush, 14 red, and 5 magenta beads.

Blue Batman with City

This pattern uses 161 white, 232 light blue, 136 cobalt, 153 black, 65 yellow, 52 sand, 33 tan, and 137 gray beads.

Vintage Catwoman

This pattern uses 406 black, 94 red, 108 dark gray, 126 cherry, 6 brown, 10 fawn, 22 sand, 38 toasted marshmallow, 10 white, 2 light gray, 6 raspberry, and 2 flamingo.

Batman . . . and Superman

This pattern uses 221 black, 66 sand, 187 red, 177 light blue, 102 light gray, 14 yellow, 60 dark gray, and 12 cheddar beads.

The Dark Knight

This pattern uses 383 dark gray, 423 midnight, 211 light blue, 556 black, 129 sky, 198 gray, 173 white, 2 light gray, 53 sand, 92 spice, 51 honey, and 33 toasted marshmallow beads.

Man of Steel

This pattern uses 523 dark blue (or midnight), 1085 black, 332 dark gray, 287 gray, 251 light gray, and 22 sand beads.

Heath Ledger Joker

This pattern uses 138 evergreen, 596 black, 35 slime, 551 light lavender, 84 sand, 527 white, 68 bright green, 23 pastel lavender, 181 purple, 82 pastel blue, 87 cranapple, 115 dark blue, and 13 cherry beads.